I have hundreds of Sony Digital8 tapes and a fair number of Sony Hi8 Tapes. After a catastrophic disaster to my HDDs all my digitised versions of the material on these tapes were lost. So I now need to re-digitise the whole lot as quickly as possible as time has degraded the image and sound quality. The camera I recorded the interview material contained on these tapes and used to digitise them, the Sony DCR-TRV330, is now starting to die. After looking for a replacement option, I found the Sony GV-D200 which looks like it could help my workflow due to not having to turn the camera upside down each time I have to change the tape plus it would fit well on my desk next to all the other essential editing pherphials. So with all that said my question is:
Will a completely refurbished Sony GV-D200 enable me to digitise my Hi8 and Digital8 tapes using FCP 6?
Will I be able to preview what I am digitising and control the device within FCP 6? Will it digitise the tapes at a higher quality than using the now 17 year old Sony DCR-TRV330 camera? I use a Sony HVR-M15U to digitise my miniHDV tapes using FCP 6 and I can control the deck and preview what I'm digitising. Plus, it does a far superior as far as the quality of video and audio as opposed to using the camera I used to record the material I am now digitising. Will the Sony GV-D200 give me that same ability when digitising Hi8 and Digital8 tapes?
I'm using the Sony HVR-M15U on a Mac Mini with a 2.5GHz dual-core Intel Core i5 processor and 4Gb of RAM and for a Mac with such low Specs it does sas good a job as my late 2015 iMac. Will the Sony GV-D200 work as well on this Mac mini as the Sony HVR-M15U?
Any advice, answers or comments would be very much appreciated.
Hard to be positive. It does have FireWire, and you can choose the DV Easy Setup for DV cameras...that might work. Should work in theory. I haven't actually done it with Hi-8 and digital 8 with a deck like that. But it SHOULD work.