FORUMS: list search recent posts

Exporting from Final cut pro 7 to Betacam SP

COW Forums : Apple Final Cut Pro Legacy

<< PREVIOUS   •   FAQ   •   VIEW ALL   •   PRINT   •   NEXT >>
rajiv bopearatchyExporting from Final cut pro 7 to Betacam SP
by on Feb 15, 2012 at 12:14:43 pm

Hello Everyone,

I just bought an apple Imac and got Final cut pro 7 installed. I am new to both Apple and Final cut pro. Can some one please tell me after i've completed a project how can i transfer the project to a Betacam SP and what firewire cable should I use? Please help me out here.

Thank you in advance.

Raj


Return to posts index

Chris TompkinsRe: Exporting from Final cut pro 7 to Betacam SP
by on Feb 15, 2012 at 6:26:33 pm

You need an i/o card to lay out to tape.
You are very limited in this area with an iMac.

You need Firwire to Analog i/o such as the outdated AJA IOLA
Also look @ Matrox products.

Chris Tompkins
Video Atlanta LLC


Return to posts index

Dennis LeppellRe: Exporting from Final cut pro 7 to Betacam SP
by on Feb 15, 2012 at 9:33:41 pm

If you pass the video signal thru a dv deck, you do not need to lay off with i/o device. The trick though is deck control. We use a usb to rs422 converter/keyspan to control our beta deck.



Return to posts index


rajiv bopearatchyRe: Exporting from Final cut pro 7 to Betacam SP
by on Feb 17, 2012 at 5:20:06 am

Thank you dennis. Appreciate your help Very much.


Return to posts index

rajiv bopearatchyRe: Exporting from Final cut pro 7 to Betacam SP
by on Feb 17, 2012 at 5:35:46 am

Thank you Chris. Good tip. i will look in to both of the options.


Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2016 CreativeCOW.net All Rights Reserved
[TOP]