ZAXWERKS: Zaxwerks Forum Zaxwerks Tutorials

Vector corner construction

COW Forums : Zaxwerks

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
jay brownVector corner construction
by on May 26, 2008 at 8:25:56 pm

Hi

I have a logo which is pretty much a capital letter A.

The top edge between the top 2 vector points of the top of the letter when opened in Po Animator extrudes outwards - this is the opposite direction to all the other edges - they extrude inwards.

I hope this clear enough.

Is there a certain methodology to creating corner points on vectors to eliminate such anomalies.

thanks in advance




Return to posts index

Jon OkerstromRe: Vector corner construction
by on May 27, 2008 at 3:13:41 am

Jay,

You will want to examine the corner point. Sometimes the control handles are twisted - sometimes you'll find extra points. Either of these things can cause spikes.

Using the spike buster slider can eliminate the problem in many cases.

Jon



Return to posts index

jay brownRe: Vector corner construction
by on May 27, 2008 at 8:30:47 am

Thanks Jon

That seems to have fixed it



Return to posts index


Jon OkerstromRe: Vector corner construction
by on May 28, 2008 at 2:40:50 am

You're very welcome.

Jon



Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]