ZAXWERKS: Zaxwerks Forum Zaxwerks Tutorials

3d objects and controllers

COW Forums : Zaxwerks

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Billie O.3d objects and controllers
by on Oct 27, 2005 at 9:49:13 pm

This is a two part question. First when I try and use 3d objects in Zaxwerks, they seem to disappear when I chech the use comp camera button. I am using a comp camera, zaxwerks layer and a controller.

The next question is regarding controllers. When I import a 3d object such as a lwo file, the imported object is not responding to the controller while objects generated in zaxwerks are fine. Any ideas?


I have just started with Zaxwerks and am sure this is all user error so any info will help.

Billie O.

Billie O.


Return to posts index

Larry ButcherRe: 3d objects and controllers
by on May 9, 2006 at 7:21:30 pm

Did anyone respond to this? I'm having the exact same problem. And, oddly enough, I live in Seattle as you do.


Return to posts index

SergeRe: 3d objects and controllers
by on May 9, 2006 at 8:41:39 pm

Hi,

Not to have your object disappear once you switch to the AE Camera you should do the following:
-In the Scene Preview window in camera mode, Click on Front View.
-Now, check the use AE Camera box.

As to question #2 I assume that you are referring to the Set controllers. Right?
In this case, make sure in the Set-Up window that your object is assigned to a set other then Set (0). I remember an older version of Invigorator that used to import 3D objects to Set (0) by default.

Does this help?

Salut.
Serge

"InvigoMany" Now available here:
http://www.nyc-visual.com


Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]