MEDIA 100: Media 100 844/X Forum Media 100 Forum Media 100 Tutorials

Kona 3 Y/C output from Media100 DV timeline

COW Forums : Media 100

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Matt JonesKona 3 Y/C output from Media100 DV timeline
by on Nov 9, 2012 at 4:18:31 pm

We cannot get our Kona3 (v10.3) to output stable Y/C from a Media100HD(v2.1.2) 4:3 DV timeline.

AJA TV plays and converts the clip fine.

When Media100HD launches, the y/c output scrambles. We see the correct colors, but the images are broken up by horizontal lines and is even a stable mess.

Media100HD will correctly output a 16:9 DV file, but not 4:3

Media100HD will correctly downconvert any HD to SD Y/C.

What is going on here?

Does anyone else have a Kona3 and a y/c breakout cable and monitor to test this?

I have been working with media100 since version 2 so I'm pretty sure I've got all the media settings and preferences set correctly. I used to have an LHe that I did this with, but now I'm working with the Kona3 and it won't work. It should work??

Any feedback from a similar configuration would be helpful.

Thanks,

Matt Jones
North Carolina Museum of Natural Sciences


Return to posts index

Floh PetersRe: Kona 3 Y/C output from Media100 DV timeline
by on Nov 9, 2012 at 5:13:35 pm

I will try to check it with our Kona3 this evening. Your timeline is SD4:3, PAL or NTSC? And you want to output a Y/C SD signal, right?



Return to posts index

Matt JonesRe: Kona 3 Y/C output from Media100 DV timeline
by on Nov 9, 2012 at 5:39:29 pm

Thanks Floh,

Yes, 4:3 DV NTSC to SD Y/C.

Mj


Return to posts index


Matt JonesRe: Kona 3 Y/C output from Media100 DV timeline
by on Nov 19, 2012 at 7:48:17 pm

Hi Floh,

Did you ever get a chance to test your YC output from a DV timeline?

Thanks,

Matt Jones
North Carolina Museum of Natural Sciences
919-707-9263


Return to posts index

Floh PetersRe: Kona 3 Y/C output from Media100 DV timeline
by on Dec 6, 2012 at 4:22:38 pm

[Matt Jones] "Did you ever get a chance to test your YC output from a DV timeline?
"


Hi Matt,

sorry for the delay.

I have the latest beta version of the next release installed on our Kona3 system, and with this software version Y/C output works as expected. Just tested with a 525i 4:3 29.97 timeline. I will try to downgrade to the current release version to see if it works differently, but unfortunately I still did not find the time to do so.

Floh



Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]