MEDIA 100: Media 100 844/X Forum Media 100 Forum Media 100 Tutorials

Keyspan machine control

COW Forums : Media 100

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Matt JonesKeyspan machine control
by on Apr 21, 2009 at 2:09:35 pm

My Keyspan USA-28x B USB to serial adapter has stopped working. It was working with an older version of M100, I'm just not sure when it stopped working.

I am running M10013.0 with an AJA LHe on a Quad core running OSX 10.5.6.

Although I can see 3 choices for the serial control, the Kona Serial is the only one that works.

I have been to Keyspan/TrippLite's website and downloaded what I though was the most recent driver.

Is anyone else using this Keyspan adapter successfully?

Thanks,

Matt

Matt Jones
Metro Productions, Inc.
Raleigh, NC


Return to posts index

Matt JonesRe: Keyspan machine control
by on Apr 21, 2009 at 5:49:18 pm

I called Keyspan TS and they sent me the correct drivers. It's working again. Yeay.


Matt Jones
Metro Productions, Inc.
Raleigh, NC


Return to posts index

Doug CalhounRe: Keyspan machine control
by on Apr 23, 2009 at 7:32:51 pm

Matt,

I'm installing and HDe system now. If you have a link or a driver #, I'd much appreciate it.

Doug



Return to posts index


Floh PetersRe: Keyspan machine control
by on Apr 24, 2009 at 6:07:48 am

[Doug Calhoun] "I'm installing and HDe system now. If you have a link or a driver #, I'd much appreciate it. "

Just FYI: The RS422 port on the Kona card/Breakout Box does not require an additional driver. This is included in the Kona installer. You only need an extra driver if you are using one of the older Keyspan RS422 adaptors.



Return to posts index

Doug CalhounRe: Keyspan machine control
by on Apr 24, 2009 at 6:53:11 pm

Thanks Floh,

I'll likely just pick up a new cable so I don't have to mess with it, this one is 9 pin to serial with a Keyspan serial to USB adapter.

Doug



Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]