MEDIA 100: Media 100 844/X Forum Media 100 Forum Media 100 Tutorials

Conformed program results in garbage

COW Forums : Media 100

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Tim SilvaConformed program results in garbage
by on Apr 15, 2008 at 2:42:15 pm

I have a program of 16x9 8 bit uncompressed clips in M100HDx. I tried conforming the program to output to 4 x 3. When I play the conformed program back it skips, flashes green lines and is full of noise. Any thoughts?

Thanks - Tim


Return to posts index

Kieran MatthewRe: Conformed program results in garbage
by on Apr 15, 2008 at 4:38:24 pm

Hi Tim,

Are your render settings the same as the media (8 bit uncompressed)? Strange things happen when they aren't.

HTH

K



Return to posts index

Tim SilvaRe: Conformed program results in garbage
by on Apr 15, 2008 at 5:54:48 pm

K,

I'm not sure what you mean by render settings?

Tim



Return to posts index


Kieran MatthewRe: Conformed program results in garbage
by on Apr 15, 2008 at 5:58:21 pm

Hi Tim,

Media 100 > Project Settings > Codecs

Make sure the render codec is the same as the one you created the media in (8 bit uncompressed in your case).

HTH

K



Return to posts index

Tim SilvaRe: Conformed program results in garbage
by on Apr 15, 2008 at 6:57:41 pm

K,

I changed the codec so it matched, but that didn't do it. The 2 graphic clips which are M100HD codec conformed OK... but the video clips didn't. Hmmm...

Tim



Return to posts index

Kieran MatthewRe: Conformed program results in garbage
by on Apr 15, 2008 at 7:35:24 pm

Hi Tim,

Try rendering a title over the top of your program - this should make sure that the timeline is all in the same codec. Then conform as before.

K



Return to posts index


Floh PetersRe: Conformed program results in garbage
by on Apr 15, 2008 at 7:37:16 pm

Conform should not care about the codec. What version are you using? What codec? What source and target format?



Return to posts index

Tim SilvaRe: Conformed program results in garbage
by on Apr 15, 2008 at 8:42:43 pm

M100HDx 12.1.2, clips in the program were imported as Uncompressed 8bit 16x9. I'm wanting to conform to a 4x3 program.

Tim



Return to posts index

Clare NeffRe: Conformed program results in garbage
by on May 1, 2008 at 3:24:47 pm

There is a popup box that appears when you try to conform, with a small checkbox that says something about making the video offline to be re-acquired later. If you uncheck this box, it conforms all of the video as well as the graphics.



Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]