MEDIA 100: Media 100 844/X Forum Media 100 Forum Media 100 Tutorials

720 to 640

COW Forums : Media 100

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Jack Shepard720 to 640
by on Jan 29, 2007 at 11:49:12 pm


Working in Media 100i and I have a 720 clip that needs to go into a 640 timeline. I've been trying different ways to export it and bringing it back in but I always end up with strobing (due to I suppose the difference between the 720 and 640). Any suggestions on how to do this? Never have had to go backwards before.
And since I am asking - what if I wanted to go 640 to 720.

Thanks in advance.



Return to posts index

MichaelRRe: 720 to 640
by on Jan 30, 2007 at 5:12:49 pm

Bring your 720 clip into a 640 x 480 program in After Effects, and position your clip down one pixel. You may need to squeeze it horizontally slightly, but don't do any vertical scaling.
Render it out as a Media 100 640 x 480 movie, and you are set.




Working in Media 100i and I have a 720 clip that needs to go into a 640 timeline. I've been trying different ways to export it and bringing it back in but I always end up with strobing (due to I suppose the difference between the 720 and 640). Any suggestions on how to do this? Never have had to go backwards before.
And since I am asking - what if I wanted to go 640 to 720.


Return to posts index

Jack ShepardRe: 720 to 640
by on Jan 30, 2007 at 5:36:31 pm

Thanks. Ill give it a shot.


Return to posts index


Arthur DentRe: 720 to 640
by on Jan 30, 2007 at 7:33:05 pm

fyi, Media 100's new line can Mix 640 and 720. Producer et al is native 720 and scales the 640 to fit a 720 frame (and leaves 3 black lines at the top and bottom of the frame). You would still need to do the AE trick if you're sending such a hybrid timeline to AE.

A.D.


Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]