MEDIA 100: Media 100 844/X Forum Media 100 Forum Media 100 Tutorials

Still poblems monitoring M100 Hde

COW Forums : Media 100

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Greg
Still poblems monitoring M100 Hde
by
on Dec 15, 2006 at 1:21:33 pm

I've hooked up a Horita BSG 50 to the reference in on my
Sony PVW 2800 deck. I take the composite output from the deck to my NTSC composite monitor. Still can't lose the black bar in my monitor. This isn't good when a client is present.

I'm editing analog component to my PVW 2800.

My set-up is a Mac G5 Quad, out to the AJA junction box to the PVW deck. Any thoughts? Do I need to take some reference in and out of the Aja box too?


Return to posts index

Floh
Re: Still poblems monitoring M100 Hde
by
on Dec 15, 2006 at 4:51:57 pm

You should connect the Ref out from the Aja hardware to the Ref in of the deck when mastering (or when watching "through" the deck).


Return to posts index

Greg
Re: Still problems monitoring M100 Hde
by
on Dec 15, 2006 at 6:18:51 pm

Thanks Floh, but this still does not work. Is there something need to set up in the AJA to make this work?


Return to posts index


David Issko
Re: Still problems monitoring M100 Hde
on Dec 17, 2006 at 4:14:35 am

Try composite video out (if there is such an o/p from the AJA to the 2800 ref in. Make sure the ref in on the 2800 is terminated.

I have been working this way with my M100i for years and years and my 2800 is genlocked to the M100.

hope this helps


Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]