MEDIA 100: Media 100 844/X Forum Media 100 Forum Media 100 Tutorials

Media 100i 8.1.1 video level issue

COW Forums : Media 100

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Al Clarke
Media 100i 8.1.1 video level issue
on Nov 18, 2005 at 5:09:45 pm

Let me start be saying that I am not a Media 100 editor - I have four 8.1.1 systems on G4's deployed at remote locations which I have inherited. Here is what I observed:
Digitize a still frame that is half black and half white. Adjust the proc amp so that black is 7.5 and white is 100 ire. Now take that clip and play it back off the timeline through the wave form and black is still 7.5 but the white is at 90 ire. In fact with other images it seems that the whole range is being dropped by 10 ire while keeping the 7.5 at the bottom. The work crushed comes to mind.
Any advice? I need to solve this issue - thanks in advance.............Al


Return to posts index

Floh
Re: Media 100i 8.1.1 video level issue
by
on Nov 18, 2005 at 10:41:05 pm

Where are you measuring your levels for setting up the ProcAmps? On your external waveform? And these don


Return to posts index

Al Clarke
Re: Media 100i 8.1.1 video level issue
on Nov 19, 2005 at 12:27:38 pm

Measuring on an external waveform - component - 100 ire coming in 90 off the timeline out - where should I start looking?



Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]