MEDIA 100: Media 100 844/X Forum Media 100 Forum Media 100 Tutorials

Video Rate Too High?

COW Forums : Media 100

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Dave Simpson
Video Rate Too High?
on Oct 27, 2005 at 12:22:30 am

Hello,
I am in the middle of a large project and have run into a snag.
One of the segments I have rendered in after effects, seems to import,
but then shows up in the bin with a Video Rate too high error message.
I am using the same render and output settings as I have been:

Video Output Media 100, spatial Quality = Most (100)

Compression Type is Media 100 NTSC

Depth Millions of colours +

Quality Best

Do lossless compression checked.

Any suggestions would be appreciated.

Thank You


Dave Simpson


Return to posts index

matt short
Re: Video Rate Too High?
on Oct 27, 2005 at 11:27:09 am

In the Output Module under Format Options try setting a limit to your data rate. You might also try rendering as an Animation file. What does it say the data rate is in the M100 bin? What version of M100 do you have? I had this problem on my 7.0 system. I had to import at 200kb. Anything higher and I had problems. The problem may also be the bandwidth of your media drives. What are you using?


Return to posts index

Dave Simpson
Re: Video Rate Too High?
on Oct 27, 2005 at 4:20:16 pm

Thanks for the response. I'm using Media 100 I 8.2, with Lacie Firewire drives.
I turned down the quality a bit and it imported okay. I guess that particular scene
did have a lot of very fine detail in it, so I'll have to keep that in mind before I hit the render button.

Thanks

dave


Return to posts index


MichaelR
Re: Video Rate Too High?
on Oct 27, 2005 at 2:30:37 pm

I've seen this too, especially on complex scenes.
One solution is to set the quality to a bit below half. The quality slider is non-linear, and you will still get a good picture.


Return to posts index

Dave Simpson
Re: Video Rate Too High?
on Oct 27, 2005 at 4:21:20 pm

You're right. I did just that and it looks fine.

Thank You

Dave


Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]