MEDIA 100: Media 100 844/X Forum Media 100 Forum Media 100 Tutorials

Software Waveform/vectorscope?

COW Forums : Media 100

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Michael Todd Thorpe
Software Waveform/vectorscope?
on Aug 1, 2005 at 6:11:24 pm

Hi everyone,

I'm wondering if anyone on the board knows about or has used a software version of waveform monitor and vectorcope on their M100i system? I'm not talking about for input into the system, but rather for monitoring the output of NTSC legal levels.

I'm not even sure anything like this would work on M100i, but I've been asked to cut hardware scopes out of the budget for one of my edit bays and I'm looking for an alternative.

Thanks in advance,

Todd

Michael Todd Thorpe
Producer/Director
KUVI TV45


Return to posts index

Floh
Re: Software Waveform/vectorscope?
by
on Aug 1, 2005 at 6:21:14 pm

[Michael Todd Thorpe] "m not even sure anything like this would work on M100i, but I've been asked to cut hardware scopes out of the budget for one of my edit bays and I'm looking for an alternative."

There is none. Buy a good hardware based waveform/vectorscope (including gamut error warnings) and be safe for everything broadcasters will throw at you.


Return to posts index

Michael Todd Thorpe
Re: Software Waveform/vectorscope?
on Aug 1, 2005 at 6:32:20 pm

Thanks, Floh. I didn't think there was anything that would work, software wise, but I thought I'd check here...

Todd

Michael Todd Thorpe
Producer/Director
KUVI TV45


Return to posts index


Al J. Marschke
Re: Software Waveform/vectorscope?
on Aug 2, 2005 at 2:59:27 am

This helps me while in AE


http://www.synthetic-ap.com/products/tg/index.html

Al J. Marschke
BluMars Media
Pittsburgh, PA


Return to posts index

Michael Todd Thorpe
Re: Software Waveform/vectorscope?
on Aug 2, 2005 at 3:20:25 pm

Thanks, I'll check it out...

Michael Todd Thorpe
Producer/Director
KUVI TV45


Return to posts index

Lukkee Chong
Re: Software Waveform/vectorscope?
on Aug 2, 2005 at 11:29:52 pm

There is a software waveform/vectorscope in Media100 SW, I think there is one in HD also. I am not sure how it measures up to real-world ones though....
lc



Return to posts index


Al J. Marschke
Re: Software Waveform/vectorscope?
on Aug 3, 2005 at 10:55:48 am

I believe that the media 100 scopes are for input only and cannot help you with graphics you create for output.

Al J. Marschke
BluMars Media
Pittsburgh, PA


Return to posts index

Floh
Re: Software Waveform/vectorscope?
by
on Aug 3, 2005 at 10:59:20 am

[Al J. Marschke] "I believe that the media 100 scopes are for input only and cannot help you with graphics you create for output."

The scopes in HD/sw are for timeline/output, not for input.


Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]