MEDIA 100: Media 100 844/X Forum Media 100 Forum Media 100 Tutorials

no b-y

COW Forums : Media 100

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
tPixno b-y
by on Jul 22, 2005 at 12:38:49 am

I've suddenly lost b-y on digitizing component. 7.5.1, p60000 w/DV, MDD1.25Ghz. Output for component is fine, as is i/o for all others. I've swapped all cables, junction panels and tried another Mac. Probably a partially pooched board. Any thoughts?

Return to posts index

FlohRe: no b-y
by on Jul 22, 2005 at 6:43:55 am

If you have disconnected your breakout box lately, have you looked if there is a bent pin on the connection cable? This happens easily and is the most likely source of a missing signal. And you should check the output of the beta and the cables to be sure that it is a Media 100 problem. Maybe the Media 100 hardware test does detect an error...

Return to posts index

tPixRe: no b-y
by on Jul 22, 2005 at 2:13:03 pm

Thanks Floh,

Tried and checked all of that - no bent pins, no bad cables, betacam output signal ok. Sigh...

Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 All Rights Reserved