MEDIA 100: Media 100 844/X Forum Media 100 Forum Media 100 Tutorials

S-Video not working correct

COW Forums : Media 100

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Ernie SantellaS-Video not working correct
by on Jun 3, 2005 at 4:02:22 pm

I can't get the S-video input on my system to work correctly? I've only used Component & Composite for 8 yrs! So, the first time I try S-video, All I get is B&W from any source tried. What am I missing?

Ernie Santella
Santella Film/Video Productions
http://www.santellaproductions.com


Return to posts index

FlohRe: S-Video not working correct
by on Jun 3, 2005 at 4:12:03 pm

[Ernie Santella] "What am I missing?"

You are missing the color information, most likely because of a connection problem. Either your S-Video cable has a bent (or missing) pin, or your connection cable between your breakout box and your P6000 board. It also could be something on the board itself but that


Return to posts index

jokemasterRe: S-Video not working correct
by on Jun 3, 2005 at 9:06:46 pm

I seem to remember having a problem getting color info from old 3/4 decks.

I think I was using the JVC 7pin to 4 pin connection.

Could only get the composite info from those decks.


Return to posts index


Ernie SantellaRe: S-Video not working correct
by on Jun 5, 2005 at 5:16:00 am

It must be something in the breakout box or it's cable. I've tried a couple of S cables and they all work fine. Oh, well... guess I should have checked that out 8 years ago! I thought it might be something SW related.

Ernie Santella
Santella Film/Video Productions
http://www.santellaproductions.com


Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]