ADOBE AFTER EFFECTS: Forum Expressions Tutorials Creative Cloud

Trouble shooting with no scope

COW Forums : Adobe After Effects

<< PREVIOUS   •   FAQ   •   VIEW ALL   •   PRINT   •   NEXT >>
Richard Collins
Trouble shooting with no scope
on Mar 3, 2017 at 4:00:08 pm
Last Edited By Richard Collins on Mar 3, 2017 at 4:04:44 pm

I am setting up a video feed for a testing facility, the viewing area is about 1.5 miles from the test area. I have a Sony PXW-X70s sending 720p60 over a AJA FiDO SDI to fiber converter transmitter to a AJA FiDO receiver over single mode fiber, from there the signal has to be sent over to a conference room about 400-500ft away that only has multi-mode fiber heading to it so I am utilizing the Thor fiber F-M1SDI-TX-RX transmitter and receiver and from there the SDI output is going over a belden 1505A cable to a Blackmagic SDI-HDMI converter. when I am looking at the video feed from the Thor converter everything seems to hold up but going through the BM SDI-HDMI I start to get the video signal cutting in and out, and the audio dropping. I do not have a scope of any kind but there is a group on plant that has an oscilloscope that I could possibly use.

Links to products used:
Sony PXW-X70
http://www.markertek.com/product/sny-pxw-70/sony-pxw-x70-xdcam-xavc-hd422-c...

AJA SDI-Fiber TR & RC
http://www.markertek.com/product/aja-fido-t-st/aja-fido-t-st-1-channel-sdi-to-st-fiber-converter-w-looping-sdi-out

http://www.markertek.com/product/aja-fido-r-st/aja-fido-r-st-1-channel-st-fiber-to-sdi-converter-w-dual-sdi-outputs

Thor TR & RC
http://www.markertek.com/product/thr-m1sdi-tx-rx/thor-fiber-f-m1sdi-tx-rx-1ch-hd-sdi-transmitter-receiver-kit-over-singlemode-fiber-st-pc-20km

Black magic micro ddi-hdmi
http://www.markertek.com/product/bmd-convcmic-sh/blackmagic-design-bmd-conv...


Return to posts index

Walter Soyka
Re: Trouble shooting with no scope
on Mar 3, 2017 at 9:15:08 pm

Richard, unfortunately I don't think you should expect much help on this issue here in the Adobe After Effects forum.

Maybe try the Broadcasting forum?
https://forums.creativecow.net/broadcasting

Walter Soyka
Designer & Mad Scientist at Keen Live [link]
Motion Graphics, Widescreen Events, Presentation Design, and Consulting
@keenlive [twitter]   |   RenderBreak [blog]   |   Profile [LinkedIn]


Return to posts index

Richard Collins
Re: Trouble shooting with no scope
on Mar 6, 2017 at 11:25:13 am

Thanks Walter, I noticed that when I click on broadcast design it redirected me here I am going to delete this one and repost it in the broadcast forum.


Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]