MAXON CINEMA 4D: Cinema 4D Forum Adobe After Effects Forum

Shoe modeling subdivision surface problem

COW Forums : Maxon Cinema 4D

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Djordje Mojsilovic
Shoe modeling subdivision surface problem
on Aug 18, 2019 at 9:53:14 am
Last Edited By Djordje Mojsilovic on Aug 18, 2019 at 9:53:52 am

Hello
I have a newbie problem and im hoping someone will help because im stuck trying to model an adidas originals sneaker.
The problem is the soul of the shoe. I am not sure how to approach the end part of the soul. The example photos are bellow.

Question is: Is there a way to cut geometry like this without it messing up, so that one part of the soul is up, and another is lower - without
geometry messing up or introducing cuts that will squareify the form? Or should you just do the entire soul and fix that last part afterwards,
with extrusions?



Return to posts index

Sam Treadway
Re: Shoe modeling subdivision surface problem
on Aug 19, 2019 at 2:47:15 am

If you have a recent version of C4D then you will want to get to know the bevel deformer.

First, get rid of all the extra cuts you have so that you have just 3 edges on the back (top, mid, bottom) and two on the front part.
Select all the bottom and top edges and if you've extruded inward then those corder edges that you want to square off.
Now create a selection set from those edges.


Add a bevel deformer as a child of the mesh and drag that edge election tag to the bevel deformer's "Selection" field.
Set the Bevel Mode of the deformer to "Solid" and adjust the offset.
Drop the mesh in a SDS and you'll get something like this:


Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2019 CreativeCOW.net All Rights Reserved
[TOP]