MAXON CINEMA 4D: Cinema 4D Forum Adobe After Effects Forum

Twisting Ribbon

COW Forums : Maxon Cinema 4D

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Milos Ristoski
Twisting Ribbon
on Mar 9, 2016 at 8:44:17 am

Does anyone have idea how the twisting logo at the end of this video is created. I tried with twist deformer, but no luck.






Return to posts index

Walter Volbers
Re: Twisting Ribbon
on Mar 9, 2016 at 9:47:39 am

Hello,
depends how the logo-grid is in space!
create a grid: Orientation +Y change it to the desired form,
then atache a Twist deformer, do not Fit to parent!,rotate the Twist-
deformer in P to 90degrees, now you should see the twist-effect, change the twist-deformers size
as you need it if, you now move/translate the deformer in z the twist is travelling trough the
grid,
hope this was clear


Return to posts index

Milos Ristoski
Re: Twisting Ribbon
on Mar 9, 2016 at 1:20:57 pm

Yes I figured that out, but I am asking about the folded logo at the end, like a twisted paper page.


Return to posts index


Walter Volbers
Re: Twisting Ribbon
on Mar 9, 2016 at 2:34:43 pm

ohh sorry,
if you have access to studio/character you can then bind the grid eg. with two nulls
see attached example https://f1.creativecow.net/9870/bend-with-bind?uploaded=file
or this will also work :)
good luck
Walter


Return to posts index

Walter Volbers
Re: Twisting Ribbon
on Mar 9, 2016 at 9:54:50 am

Hello,
depends how the logo-grid is in space!
create a grid: Orientation +Y change it to the desired form,
then atache a Twist deformer, do not Fit to parent!,rotate the Twist-
deformer in P to 90degrees, now you should see the twist-effect, change the twist-deformers size
as you need it if, you now move/translate the deformer in z the twist is travelling trough the
grid,
hope this was clear


Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]