First Build. Hardware advice needed please!
Hello all! Thank you in advance for taking the time to check this out for me. I've never built a PC before, so I'm sure all of you can understand and recall the feelings/thoughts I'm going through.
A general 3d/graphic design build.
I understand more cores equal faster render times and less but more powerful cores allow for a faster live interaction when modeling.
There is a possibility I will use third party software to utilize my GPU because Cinema 4d does not use GPU for render.
It would be great to have a 12-core, or two 6-core CPU's but my budget was $1500.
Everything on this list, including insurance and subtracting mail in rebates, comes to $1546. After all the research I've done, I don't mind spending the extra 46 bucks!
PC Build Below: Let me know if I'm missing anything or you guys see any red flags on this build! Thanks!!!
MOBO: ASRock X99 Extreme4 LGA 2011-3 ATX Intel Motherboard
RAM: Crucial Ballistix Sport 16GB Kit (8GBx2) DDR4
GPU: Gigabyte GeForce GTX 970
PSU: CORSAIR CX series CX750 750W ATX12V
Storage: Crucial BX100 120GB SATA III 6Gb/s 2.5" Solid State | Seagate Barracuda 2TB 7,200 RPM SATA III 6Gb/s 3.5
Case: Cooler Master HAF 912 Mid Tower ATX Computer Case
Liquid Cooler: CORSAIR Hydro Series H105 Extreme Performance 240mm Liquid CPU Cooler
Optical Drive: WH14NS40 16x Internal Blu-Ray Rewriter
OS: Windows 7
Arctic Silver 5 High-Density Polysynthetic Silver Thermal Compound 3.5g: