MAXON CINEMA 4D: Cinema 4D Forum Adobe After Effects Forum

Struggling with rigging a Bobcat loader for driving

COW Forums : Maxon Cinema 4D

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Jon Simpson
Struggling with rigging a Bobcat loader for driving
on Aug 30, 2014 at 5:42:01 pm

I have been working on this so much and I am almost there, but the loader keeps sinking into the ground instead of moving forward. The wheels are turning and I have my steering set up properly but I cannot figure out wth I am doing wrong. Anybody good at rigging cars? I have attached the file I am working with.

7927_bobcats590c4d.rar.zip


Return to posts index

Brian Jones
Re: Struggling with rigging a Bobcat loader for driving
on Aug 31, 2014 at 2:27:11 pm

the Plane object is too small, it's catching the body but not the wheels. Make it bigger or use a Floor object for your collider tag


Return to posts index

Jon Simpson
Re: Struggling with rigging a Bobcat loader for driving
on Aug 31, 2014 at 3:11:04 pm

Thank you!! I was pulling my hair out. I had a properly sized plane in the scene earlier but somehow ended up with that one. However, enlarging the plane did not work, the floor object is what did the trick. I also discovered that I needed to remove the rigid body tags that the tutorial said I needed on the wheels, otherwise it was only steering on the first frame - stuck from there.

Thank you so much!!


Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]