MAXON CINEMA 4D: Cinema 4D Forum Adobe After Effects Forum

Baking/Exporting 3D Data with an External Compositing tag via Mograph Fracture

COW Forums : Maxon Cinema 4D

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Jeremy Frye
Baking/Exporting 3D Data with an External Compositing tag via Mograph Fracture
on Mar 12, 2013 at 10:16:39 pm

Ok so the subject might be a bit messy - here is the run down.

I want to use the delay effector by putting my device in a Fracture object and then having the Delay effector effect said device.

I also have an external compositing tag and compositing tag for the screen of the device.

When I render it with all the proper channels to get it into After Effects, I don't get a solid for my screen. When I take it out of the Fracture Object all is well. I put it back in and nothing.

Anyone come across this or have a work around? I used the MoGraph cache tag with no luck either.

Thanks!

Jeremy Frye
http://www.jeremyfrye.com


Return to posts index

Craig Whitaker
Re: Baking/Exporting 3D Data with an External Compositing tag via Mograph Fracture
on Mar 13, 2013 at 6:09:36 pm

Have you tried placing the external comp tag on the Fracture? I'm working in a similar setup at the moment with cloners.

Best,
Craig

Craig Whitaker
Digital Design Director
Assembly
161 Leverington Avenue Suite 1002
Philadelphia, PA 19127
O: 215-487-2060
craig@assemblypix.com




Return to posts index

Andy Weak
Re: Baking/Exporting 3D Data with an External Compositing tag via Mograph Fracture
on Jun 9, 2014 at 9:00:01 pm

Thanks Craig! Putting the external compositing tag on the fracture object worked for me to get solids to show up in After Effects.

Much appreciated!

andy


Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]