FORUMS: list search recent posts

Using volume envelopes with stereo files

COW Forums : Adobe Audition

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Nancy BurnettUsing volume envelopes with stereo files
by on Sep 29, 2011 at 3:03:59 pm

When I use volume envelopes with stereo files for music under voiceover, I am bringing the envelope to the middle of the bottom channel. If I don't do this, the bottom channel is still full volume.

But this means I have eliminated all audio from the top channel, and created a mono waveform. Is there any way to reduce the volume in each channel so I can maintain a stereo waveform?

Thanks!
Nancy


Return to posts index

Steven TalleyRe: Using volume envelopes with stereo files
by on Oct 13, 2011 at 1:23:26 pm

Sounds like you are accessing the fader control (left to right).


Return to posts index

Nancy BurnettRe: Using volume envelopes with stereo files
by on Oct 13, 2011 at 3:55:49 pm

Thanks for your suggestion, but it's not the fader control. I am adjusting the volume control (the green line at the top of the track), but in order to reduce the level of both channels in a stereo recording, I need to bring the volume control all the way down through the top channel to a position in the middle of the bottom channel. It seems to me that cuts out the volume of the top channel.


Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]