I have an outdoor wedding that has some minor-to-medium wind noise intermittently on the track. Is there a way of reducing that interference, at least somewhat? I've tried Noise Reduction, but the profiles I've tried apparently arent accurate enough.
You will need to bring the clip into the EDIT side of the program and highlight JUST THE NOISE you would like to remove ... Once you do that go to EFFECTS > NOISE REDUCTION > NOISE REDUCTION > CAPTURE NOISE PROFILE ... Once you capture the profile highlight the whole clip go to EFFECTS > NOISE REDUCTION > NOISE REDUCTION ... Here is where you MUST take care not to remove too much of the noise at once ... I like to remove it by about 62% or less and if I need more I reduce the percentage ... When you preview and it sounds like people are talking in a rain barrel you are going too far ... WILLIE