Tearing on BCC cylinder effect
by Tom Kaemmerling on Mar 1, 2010 at 2:07:25 pm
Used BCC cylinder effect on 3 images. The effect is the same on all the images except the final "landing" location.
Image 1: 720 x 486 TIFF image @200dpi - no problem
Image 2: 720 x 486 TIFF image @200dpi - no problem
Image 3: 720 x 486 DV video - no problem
Attemping to add:
Image 4: 720 x 486 TIFF image @200dpi
Copied and pasted the effect, but changed final placement location.
Image "tears" at the edges. Image does not tear until rendered. Tried
using a JPEG image and tried re-booting with no change.
Re: Tearing on BCC cylinder effect by peter mcauley on Mar 2, 2010 at 3:11:47 pm
You might want to pass this through our support group to see if this is something they have seen or heard of before. They should be able to assist you in resolving the issue. You can contact them via email at firstname.lastname@example.org.