BORIS FX: Boris FX Forum Boris FX Tutorials Motion Graphics After Effects

Missing Filters in RED 4.1

COW Forums : Boris FX

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Kieran Matthew
Missing Filters in RED 4.1
on Aug 4, 2007 at 6:13:31 pm

Hi All,

I recently upgraded from RED3 to 4.1 and noticed that a few of the filters are missing, most notably the DigiEffects Delerium ones, despite them appearing in the filters gallery of the 4.1 documentation.

Are these missing for a reason? Can I use the filters from my RED3 install?

Any help greatly appreciated!

K


Return to posts index

stephenlnoe
Re: Missing Filters in RED 4.1
on Aug 5, 2007 at 11:50:51 am

Yes, you can use filters from Red 3.


Return to posts index

Kieran Matthew
Re: Missing Filters in RED 4.1
on Aug 5, 2007 at 10:21:20 pm

Hi Stephen,

Having installed RED3, its filters along with the DE ones have appeared in the library-application support-borisFX folder.

Where do I need to put them so 4.1 can recognise them?

Incidentally RED3 see's all of 4.1's filters, just not the other way round.

Thanks again

Kieran


Return to posts index


cow
peter mcauley
Re: Missing Filters in RED 4.1
on Aug 6, 2007 at 2:28:01 pm

Hi Kieran,

The reason that the Delirium filters do not show up in the 4.1 installer on the Mac is that the filters were not ported over by Digieffects to work with the MacIntel processor, while RED was ported over to work with that chipset. This makes the Delirium filters incompatible with RED on the Mac.

We left the Delirium Docs in there because the Delirium filters actually still function in the Windows environment and are installed into RED 4.1 on that platform.

Cheers,

Peter.



Return to posts index

Kieran Matthew
Re: Missing Filters in RED 4.1
on Aug 7, 2007 at 6:46:31 pm

Hi Peter,

Thanks for the info. It is a shame about the DE filters as I use the electrical arcs effect quite a lot.

K


Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]