ZAXWERKS: Zaxwerks Forum Zaxwerks Tutorials

Re: Prepping a logo in photoshop, then illustrator for use ProAnimator

COW Forums : Zaxwerks

VIEW ALL   •   ADD A NEW POST   •   PRINT
Respond to this post   •   Return to posts index   •   Read entire thread


Zax Dow
Re: Prepping a logo in photoshop, then illustrator for use ProAnimator
on Mar 13, 2018 at 5:45:53 am

Hi Steve,

Sorry, our customer support guy seems to have slacked off in a big way. Let's see if I can catch you up.

First off, even if the holes don't come into PA correctly you can still fix them inside of PA. The trick is you want to end up with the hole path and the outside path both on the same PA layer.
Do this:
1- choose the path selection tool (middle of the three arrows)
2- select the hole path
3- switch to the point selection tool (right of the three arrows)
4- Cut
5- Select the outside path
6- Paste
This process puts the hole path onto the same layer as the outside path.

The problem you ran into with the Illustrator files not being able to be read is typically because the Compression option was left on during save. You can find information about it on this FAQ: https://zaxwerks.com/vector4.shtml or you can just Google the error message and find links to the answer.

Hope that helps,
Zax


Posts IndexRead Thread 


Current Message Thread:





© 2020 CreativeCOW.net All Rights Reserved
[TOP]