FORUMS: list search recent posts

AJA IO HD Won't Boot

COW Forums : AJA Video Systems

Respond to this post   •   Return to posts index   •   Read entire thread

James Harding
AJA IO HD Won't Boot
on Aug 27, 2015 at 11:31:01 am

Hi everyone,

I'm having some real problems getting my AJA IO HD to boot. The Mac I am running is a Macbook Pro running iOS 10.5 and the AJA software I have installed is the 6.0.3 version and I have updated the firmware of my IO HD to the firmware provided with the software version.

Annoyingly about 90% of the time my AJA just will not boot properly. With the firewire disconnected, the IO HD boots up showing the different firmware versions and then finished by showing the AJA logo. When the IO HD is plugged in by firewire, booted followed by the Mac, it does the same thing. When I power on the Mac first and then power on the IO HD, it hangs on the firmware readout until I disconnect the firewire cable again.

Once in a blue moon I have actually managed to get the AJA to connect to the Mac, showing SDI1 and SDI 2 on the IO HD screen and I was able to capture a digibeta tape.

Does anyone know what I might be doing wrong? I have tried different cables and a different Mac but that had the same issue and runs Mac OS 10.10 which I don't believe is supported.



Posts IndexRead Thread 

Current Message Thread:
  • AJA IO HD Won't Boot by James Harding on Aug 27, 2015 at 11:31:01 am

© 2020 All Rights Reserved