FORUMS: list search recent posts

Re: Qnap Speeds

COW Forums : NAS - Network Attached Storage

Respond to this post   •   Return to posts index   •   Read entire thread

Bob Zelin
Re: Qnap Speeds
on Jun 14, 2019 at 3:53:55 pm

by adding more drives, you have increased the total aggregate bandwidth of your QNAP.
A 10G connection theoretical bandwidth is 1250 MB/sec, and I have never seen more than about 1000 MB/sec, even with a Win 10 PC and a 10G NIC card.

Different computers, and different 10G boxes have different speeds. 900 MB/sec is plenty of speed. Now, if you have multiple editors connecting to your QNAP, your system will not be bogged down because you only have 4 drives, which had limited total aggregate bandwidth.

Make sure you have disabled SMB signing -
you can tell this by looking at the /etc/nsmb.conf file in your Mac.
you should see this inside the file

if you don't, this needs to be installed, and your computer rebooted.

For your sanity, try another thunderbolt 2 computer with your 10G adaptor, and see what the speeds are like.

Bob Zelin

Bob Zelin
Rescue 1, Inc.

Posts IndexRead Thread 

Current Message Thread:
  • Qnap Speeds by Brennan McBride on Jun 14, 2019 at 3:25:15 pm
    • Re: Qnap Speeds by Bob Zelin on Jun 14, 2019 at 3:53:55 pm

© 2020 All Rights Reserved