FORUMS: list search recent posts

Re: Using De-Flicker Filter for NTSC/PAL Problem

COW Forums : DaVinci Resolve

Respond to this post   •   Return to posts index   •   Read entire thread

Marc Wielage
Re: Using De-Flicker Filter for NTSC/PAL Problem
on Dec 9, 2019 at 12:19:06 pm

I can't tell you if it'll work or not without seeing the actual material. Try it and see. Often, confining the deflickering to one area will help. But the reality is that if there's a lot of movement in the material (particularly camera movement), it can affect the results and create a lot of artifacts.

I just had a case on a recent project last week that took me 20 minutes to figure out a combination of settings that eliminated 90% of the flicker but caused no artifacts. But it took me about 10 tries before I hit on the method. Keyframes helped. Confining the area (with Advanced Settings) helped. Comparing the various Deflicker modes helped. But my situation isn't your situation. There are no rules -- just hard work and experimentation.

Posts IndexRead Thread 

Current Message Thread:

© 2020 All Rights Reserved