FORUMS: list search recent posts

Re: Audio mapping to soundcard interface channels

COW Forums : DaVinci Resolve

VIEW ALL   •   ADD A NEW POST   •   PRINT
Respond to this post   •   Return to posts index   •   Read entire thread


Joseph Owens
Re: Audio mapping to soundcard interface channels
on Jul 3, 2018 at 9:10:10 pm

This was touched on last week on the BMD Resolve forum:
https://forum.blackmagicdesign.com/viewtopic.php?f=21&t=75658

Krishna Pada wrote (for Soundblaster)
Here are the steps:

1. In the Resolve preference pane, I had to change to 5.1 channel sound and then assign tracks like this: Audio 1 to Output 1, Audio 2 to Output 2, etc.
3. In the settings page, capture and playback section, I needed to change audio tracks to 6 (2 is the default).
4. While laying the 5.1 tracks which came from the Sound studio, I created six mono tracks and laid them.
5. In the Mixer window in Fairlight, I changed the panning of each track as per it's name. L goes to left upper corner, C at centre point, LS at left lower corner, etc. I was initially confused about LFE placement, then figured out that it has to be kept just opposite the centre track.
6. In the Fairlight tab, I opened Bus Station. Changed the output to 5.1 (it comes stereo by default).


maybe that might help.

jPo, CSI

"I always pass on free advice -- its never of any use to me" Oscar Wilde.


Posts IndexRead Thread 


Current Message Thread:





© 2019 CreativeCOW.net All Rights Reserved
[TOP]