PANASONIC HVX - HPX: Panasonic HVX - HPX Series Panasonic Varicam Panasonic AG-DVX Series

Re: VariCam detail

COW Forums : Panasonic Cameras

Respond to this post   •   Return to posts index   •   Read entire thread

Bruce Greene
Re: VariCam detail
on Oct 8, 2009 at 3:56:37 am

Bob, If the detail settings are at the factory setting...then master detail = 0 is quite a lot of detailing. A setting of of -4 master detail is subtle, but noticeable. A setting of -7 is just about invisible.

Setting master detail to off is a safe choice, but you might find the image lacks a little bit of punch. Adding detail in post is ok, but it might also add detailing to compression artifacts, and thats not so good. So, if you can find a setting you really like, you might want to set it in the camera.

Good luck with your new show!

Varicam/Steadicam Owner
Los Angeles, CA

Posts IndexRead Thread 

Current Message Thread:
  • VariCam detail by Bob Hayes on Oct 1, 2009 at 6:31:30 am
    • Re: VariCam detail by Evangelos Achillopoulos on Oct 4, 2009 at 8:45:53 am
    • Re: VariCam detail by Bruce Greene on Oct 8, 2009 at 3:56:37 am

© 2019 All Rights Reserved