FORUMS: list search recent posts

Re: 29.97 Output from Premiere

COW Forums : Blackmagic Design

VIEW ALL   •   ADD A NEW POST   •   PRINT
Respond to this post   •   Return to posts index   •   Read entire thread


Sarah Jones
Re: 29.97 Output from Premiere
on Oct 31, 2013 at 12:58:29 am

Hi Jonathan,

From our conversation in August, we determined that the DeckLinkPresets.zip contents were not installing on your system, leaving Premiere CC to only use the IntensityPresets.zip contents for your Sequence Presets. At that time in our office, we had not seen any instances where only a portion of the presets for CC were installing and I listed steps for you to manually install the remaining presets on your system to provide the 1080p29.97/30 sequences you were looking for. However, you still were unable to output 1080p29.97/30 through your Intensity. This information was passed up to be looked into on our end.

You're now on Premiere CS6 rather than CC? We have a new MacBook Pro running OS X 10.9 Mavericks, so to replicate your setup on a fresh system, Premiere CS6 was installed on this system followed by an Intensity with Desktop Video 9.8.1. In this situation, all presets were loaded and Premiere's sequence settings look the same as the screen shot Bret posts here. However, if for some reason the presets did not copy over automatically, you may manually copy the presets over yourself as we discussed previously. I will include these steps again here for everyone's information. These are the same for Premiere CS6 and CC.

Location of BMD plug-in and Sequence Preset files: 
/Library/Application Support/Blackmagic Design/Blackmagic DeckLink/CS6



Copy the plug-in files listed below into the following location:
/Library/Application Support/Adobe/Common/Plug-ins/CS6/MediaCore/

Our plugin file names:
DeckLinkDevice.bundle
DeckLinkFileImport.bundle
DeckLinkRecord.bundle (or IntensityRecord.bundle for Intensity)
DeckLinkTransmit.bundle

Locate the Adobe Premiere Pro CS6.app file and righ-click and select "Show Package Contents" to see the folder structure within. Copy the Blackmagic Editing Modes.XML file into the following location:
/Applications/Adobe Premiere Pro CS6/Adobe Premiere Pro CS6.app/Contents/Settings/Editing Modes/

Copy the SequencePreset folders found in DeckLinkPresets.zip and/or IntensityPresets.zip into the following folders:
/Applications/Adobe Premiere Pro CS6/Adobe Premiere Pro CS6.app/Contents/Settings/SequencePresets/

This should then allow Premiere to access all the Blackmagic sequence presets.

We also tested HDMI output from the Intensity with a Blackmagic 10bit YUV 1080p29.97 sequence. To our Panasonic HDTV, the 1080p29.97 signal was not seen, though other video formats were. When we tested from other sources at 1080p29.97 to the TV as well, we saw that this television does not appear to play nicely with this video format.

We then tested the Intensity output to other devices such as a capture card and also converted from HDMI to go into an SDI monitor. These additional devices took the signal without issue. We would certainly advise confirming that your monitor accepts this video format. Not all HDMI monitors will, and it's possible that the signal coming out of the Intensity is not being picked up there.

Regards,

Sarah
Support Representative
Blackmagic Design Inc.


Posts IndexRead Thread 


Current Message Thread:





© 2019 CreativeCOW.net All Rights Reserved
[TOP]