FORUMS: list search recent posts

Re: Multibridge Pro capture via SDI.

COW Forums : Blackmagic Design

VIEW ALL   •   ADD A NEW POST   •   PRINT
Respond to this post   •   Return to posts index   •   Read entire thread


Paolo Castellano
Re: Multibridge Pro capture via SDI.
on Jun 7, 2012 at 8:27:20 am

Hello Javier,
the Multibridge Pro is a fantastic "DUAL USE" device.

If you don't connect it to your PC/MAC using the PCI-e adapter, it works as a dual channel converter from Analog to SDI and from SDI to ANALOG. To configure the conversion you have to connect once the Multibridge to your PC/MAC via USB 2.0, and you will use the "Blackmagic Multibridge Utility" (your screen capture).

When you connect the Multibridge to your PC/MAC using the PCI-e adapter, it becomes a capture device, very similar to the Decklink HD Extreme 2, and you can configure it using "Blackmagic Desktop Video 9.5.2" software, that you can run:
‚‚- On Mac OS X, open the System Preferences and look in the “Other” category to locate the Blackmagic Design icon. Click the Blackmagic Design icon to gain access to the settings.
‚‚- On Windows 7, open the system Control Panel and click on “Hardware and Sound” to reveal the Blackmagic Design Control Panel. Click the Blackmagic Design Control Panel to gain access to the settings.

You can set the input in the "Settings" Tab.

In my opinion the Multibridge Pro is the best product ever made by BMD, the only missing thing was (and is) the lack of a dedicated PCI-e adapter for laptops (express card) and now for Thunderbolt.

Best Regards,

Paolo.Castellano@ivs.it
http://www.ivsEdits.com
-----------------------
"Post Fata Resurgo"


Posts IndexRead Thread 


Current Message Thread:





© 2019 CreativeCOW.net All Rights Reserved
[TOP]