FORUMS: list search recent posts

Re: Several audio feeds with ATEM 1 or 2 - how to?

COW Forums : Blackmagic Design

VIEW ALL   •   ADD A NEW POST   •   PRINT
Respond to this post   •   Return to posts index   •   Read entire thread


Justin Strauber
Re: Several audio feeds with ATEM 1 or 2 - how to?
on Feb 27, 2012 at 4:56:57 pm

You would need a real audio mixer to do what you're trying to do, though I must admit i'm not entirely sure what you're trying to do.

Anyway, in regards to 16 sources mixed down to four channels of output, you would need an audio mixer with at least 4 'busses', so that you can assign input faders to the different busses. That way you could take four inputs and route them to one output (if you're doing say, four mics down to one output)

To get the audio to the board you would either need to run the audio separately from the cameras, or purchase audio de-embedders to go from SDI-embedded to analog. Alternatively you can try and find a mixing console with SDI inputs, but that may not be cost effective.


Posts IndexRead Thread 


Current Message Thread:





© 2019 CreativeCOW.net All Rights Reserved
[TOP]