FORUMS: list search recent posts

Re: Blackmagic 7.4 Premiere 4.2 - Print to tape, out of sync.

COW Forums : Blackmagic Design

Respond to this post   •   Return to posts index   •   Read entire thread

Claus-Peter Wolf
Re: Blackmagic 7.4 Premiere 4.2 - Print to tape, out of sync.
on Dec 10, 2009 at 10:22:29 am


jepp, also same problem...for the moment is decklink
not really usably..

i have some more problems:
-when rendering the green bar over the clip dissapears..
i have to zoom in or out in the timeline to see if
the clip is rendered!
-Next problem: when i dublicate a timeline to make changes
i have to render all the clips again in the new timeline.
(in the old timeline they stay rendered!!!)
-when i edit dv and apply a effect, i have after i rendered the
clip a "line jump"!!! (Very old problem, posted many times!!!)
- When i open a project, many times premiere has to (i don´t
know how it is in englich!) "apply" the audio for all clips
again (right bottom corner in premiere)
- Also when i reopen a project Premiere has to render some effects again!!!
- The serial device Control doesn´t work!!! Some "com" Problem
I have to use Decklink Device control, and this one is long not so good as serial device Control!!!!
- When i capture in mjep the picture quality is really bad!!
- DVPro capture has drop frames!!!
- When i render clips, they change a liitle bit of croma-level!

Really really bad 7.4 driver (many of those problems i had also with 7.2 and 7.0 driver)
I tried 7.4 with Premiere Pro 4.2 in Win XP and Windows vista and Windows 7... on different Mainboards with 4 different Decklink Cards and different grafik cards...difeerent RAM and even with Sata Controlle or without Sata Controller different Hard disks!!!! In any configuartion i had the same problems!!!!

So please Decklink guys, don´t tell you never heard about
some of this problems!!!
And please don´t ask me about my configuration (it alway the
same question) i use recommanded boards...latest driver and so on.

So just work a little less with your davinci and make decklink
now work!!!!
For the moment is stepped back to PPro 2 and 6.4 drivers.
This one work okay (exept the DV Problem!)
I am really tired about testing your drivers...

Greating from Cologne

Claus-Peter Wolf

Posts IndexRead Thread 

Current Message Thread:

© 2019 All Rights Reserved