FORUMS: list search recent posts

Re: Kona 3 Audio output to JBL 4401 control monitors

COW Forums : Audio Engineering

VIEW ALL   •   ADD A NEW POST   •   PRINT
Respond to this post   •   Return to posts index   •   Read entire thread


Ty Ford
Re: Kona 3 Audio output to JBL 4401 control monitors
on Jan 18, 2013 at 9:46:36 pm

Hello Matthew and welome to the Cow Audio Forum.

The piece you're missing is a stereo audio power amplifier to power your JBL. The JBL are rated at 60 Watts each, so you don't need a very big power amp; just a good one.

You can probably go from the Mac line out to the power amp to your JBL. Having said that, Mac outputs can be noisy. I use them myself but have added a buzz eliminator, which you would put between the Mac and the power amp.

One of these: http://www.guitarcenter.com/Ebtech-2-Channel-Hum-Eliminator-100823186-i1124...

I would suggest a power amp mfgr for you, but I haven't had to buy one in years

Regards,

Ty Ford
Cow Audio Forum Leader

Want better production audio?: Ty Ford's Audio Bootcamp Field Guide
Ty Ford Blog: Ty Ford's Blog


Posts IndexRead Thread 


Current Message Thread:





© 2020 CreativeCOW.net All Rights Reserved
[TOP]