FORUMS: list search recent posts

NXCAM Linking XLRs

COW Forums : Sony NXCAM

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Bob O'Hearn
NXCAM Linking XLRs
on Dec 3, 2011 at 12:42:55 am

I am still really confused after watching a training video and reading the NX5u manual on how to have one XLR mic link to both left and right channels. I am using the camera to stream a Wirecast project and would like to have the signal coming in on both channels.

It's probably something staring right at me but I'm not seeing it. Any help would be greatly appreciated.

Thanks in advance,

Bob O'Hearn


Return to posts index

john lenihan
Re: NXCAM Linking XLRs
on Dec 3, 2011 at 5:20:14 am

Bob,

It is.
Go to the flap door on the left of the camera with the sound controls.

Open it Top left switch says int mic or input one (to go to channel 1) Select input 1.

Botton left switch says input 1, or internal mic, or input 2 (to go into channel 2) This switch actually has three choices but is confusingly marked.
Select input 1.

Now xlr input 1 goes to channel one and to channel 2.

John

John Lenihan

LeniCam Video Productions
http://www.lenicamvideoproductions.com


Return to posts index

Bob O'Hearn
Re: NXCAM Linking XLRs
on Dec 4, 2011 at 12:58:15 am

John,

Did the trick! Thanks so much for your help.

Bob



Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]