FORUMS: list search recent posts

QuadCam Vasst Support...

COW Forums : VEGAS Pro

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Dave Turnidge
QuadCam Vasst Support...
on Aug 25, 2015 at 9:03:14 pm

I called VASST but wasn't able to contact anyone - so maybe this will be faster???

I am using Ultimate S Pro 4.1.9 Quad-CAM. I have set up my two cameras, and have placed all my markers. I apparently didn't "finish" correctly, because I have no "Master" track, only a "MC-Tally" track - and the tally marker box is still showing up...and my tracks are not changing at the markers.

Any help will be appreciated - and if it's really complicated... you could call me at 763.639.0488...

TIA


Return to posts index

John Rofrano
Re: QuadCam Vasst Support...
on Aug 25, 2015 at 11:15:46 pm

You need to Process the camera tracks to create the master track. Download this demo video of InfinitiCAM and watch it and it will show you the steps. It's the same for QuadCAM:

http://vasst.com/Portals/0/software/infinitycam/infinitiCAM_quick_demo.wmv

(it's just easier to show you than to explain)

~jr

http://www.johnrofrano.com
http://www.vasst.com



Return to posts index

Steve Rhoden
Re: QuadCam Vasst Support...
on Aug 26, 2015 at 7:46:44 pm

Time passed i usually prefer InfinitiCAM.

Steve Rhoden (Cow Leader)
Film Maker & VFX Artist.
Owner of Filmex Creative Media.
Samples of my Work and Company can be seen here:
http://www.facebook.com/FilmexCreativeMedia


Return to posts index


Bob Peterson
Re: QuadCam Vasst Support...
on Aug 26, 2015 at 8:13:58 pm
Last Edited By Bob Peterson on Aug 26, 2015 at 8:16:37 pm

Will that work with a project set up to use QuadCam, or would one have to redo the work?


Return to posts index

John Rofrano
Re: QuadCam Vasst Support...
on Aug 27, 2015 at 10:55:31 am

[Bob Peterson] "Will that work with a project set up to use QuadCam, or would one have to redo the work?"
QuadCAM and infinitiCAM are 100% compatible. You can start a project with one and end with the other. InfinitiCAM just supports more cameras angles.

~jr

http://www.johnrofrano.com
http://www.vasst.com



Return to posts index

Bob Peterson
Re: QuadCam Vasst Support...
on Aug 27, 2015 at 2:29:37 pm

Thanks John. That is good to know.


Return to posts index


Dave Turnidge
Re: QuadCam Vasst Support...
on Aug 27, 2015 at 11:15:14 am

[John Rofrano] "You need to Process the camera tracks to create the master track."

I see the "Process Cameras" tab, but after watching your tutorial it took way too long to realize that the "OK" button shown in the tutorial, when used in Ultimate S Pro, was the "Apply" button...and, it was not at the bottom of the Quad-CAM window, but was outside the boundaries of the Quad-CAM area up in the USP heading area. That took a bit of mental gymnastics - and I'm a little out of shape...

I would recommend a final paragraph in the documentation specifically referencing the "Apply" button as the last step of completing the Quad-CAM action.

Thanks again!


Return to posts index

John Rofrano
Re: QuadCam Vasst Support...
on Aug 27, 2015 at 11:19:07 am

[Dave Turnidge] "I would recommend a final paragraph in the documentation specifically referencing the "Apply" button as the last step of completing the Quad-CAM action."
You're right. I'll get that updated for the future. Sorry about that but glad you figured it out.

~jr

http://www.johnrofrano.com
http://www.vasst.com



Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]