Hello
I'm in the process of ingeste material from a BVU850 pal machine. I have read a lot about TBC . I've looked at a Micro Time FT220 .
My question is regarding . BNC SC . At FT220 , there is no SC out BNC . Have looked at BVT810p and has SC out . Is it better to buy a BVT810p instead of FT220
Micro Time also has Component signal out
Is the following setup properly.
BVU850p / TBC Microtime FT220
http://images.creativecow.net/272129/bvu850.jpg
http://images.creativecow.net/272129/microtime.jpg
http://images.creativecow.net/272129/bvt810.png
1 vtr video out to tbc video in ( Composite or YC 924 Pal )
2 tbc adv.sync out to ext sync in vtr ( BVU set to ext ref)
3 tbc doc out to vtr RF off tape in
4 TBC in ref (Black Burst Generator )
BVU850p / BVT810p
1 vtr video out to tbc video in ( Composite or YC 924 )
2 TBC Adv . Sync out to ext sync in vtr ( BVU set to ext . Sync in)
3 tbc doc out to RF off tape in vtr
4 tbc SC out to SC in vtr
5 tbc ext ref in ( Black Burst Generator )
BVT810p the SC out and Mirotime FT220 has not SC out .
Do I need SC signal in the dub from u matic for Avid Liquid
Best Regards Peter Øvad Halkjær Denmark