FORUMS: list search recent posts

Re: motion judder

COW Forums : Adobe After Effects

Respond to this post   •   Return to posts index   •   Read entire thread

Kevin Camp
Re: motion judder
on Jul 15, 2008 at 4:11:49 pm

if you are talking about subject movement that seems to jerky or strobe like due to too high of a shutter angle or shutter speed, then you will need to use a plugin that can interpolate motion blur by analyzing pixel movement between frames.

revision's reelsmart motion blur does a pretty good job.

if you want to try the cheap way, you can try the timewarp effect, setting the speed to 100 (you don't want to change the speed), but enable the motion blur setting. it's not nearly as good as rsmb, but it may work well enough in a pinch.

when shooting progressive footage, you will want to take into account the shutter speed more than you would if you were shooting interlaced. if you want smooth, film-like movement, you would like to keep you shutter speed about half the frame rate. so if you shoot 25 fps, then you'd like your shutter speed to be maintained around 1/50 of a second. otherwise the footage will start looking too tight and jerky, and may be vary from shot to shot...

Kevin Camp
Senior Designer

Posts IndexRead Thread 

Current Message Thread:
  • motion judder by ali jafri on Jul 15, 2008 at 12:46:19 pm
    • Re: motion judder by Mike Park on Jul 15, 2008 at 1:21:55 pm
    • Re: motion judder by Kevin Camp on Jul 15, 2008 at 4:11:49 pm

© 2019 All Rights Reserved