FORUMS: list search recent posts

P2 Card Slot Problem

COW Forums : Panasonic Cameras

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
Dave Festa
P2 Card Slot Problem
on Aug 24, 2009 at 2:54:06 pm

We are experiencing problems with our P2 cards (A series or R series)
apparently when we go to record on them in DVC 25 an error message pops up and prevents us from recording on them, the message says the card was incompatible. But when we moved the cards into slot 3 and 4 we had no problem recording on them.
We are using the HPX 500 cams and reformat the cards in either the camera or on the Panasonic format station on a PC before we record on them.

Does anyone have any answers?
Thanks for the help


Return to posts index

Jeremy Garchow
Re: P2 Card Slot Problem
on Aug 24, 2009 at 4:36:30 pm

Is your firmware up to date?

Jeremy


Return to posts index

Dave Festa
Re: P2 Card Slot Problem
on Aug 24, 2009 at 7:42:23 pm

I'm going to update to 1.09 tomorrow and see what happens, Panasonic tells me the slot could be defective. I highly doubt that.
Thanks for the guidance!


Return to posts index


Dave Festa
Re: P2 Card Slot Problem
on Aug 25, 2009 at 7:23:43 pm

I just updated the firmware to 1.09 and to no avail!
Card slots 1 & 2 will not read any of my cards, saying they're incompatible. Slots 3 and 4 are fine, very strange. Not sure where to go from here, I'm thinking I may have to get Panasonic involved.
Thanks


Return to posts index

Jeremy Garchow
Re: P2 Card Slot Problem
on Aug 25, 2009 at 7:25:23 pm

[Dave Festa] " I'm thinking I may have to get Panasonic involved. "

Agreed.

Jeremy


Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2019 CreativeCOW.net All Rights Reserved
[TOP]