FORUMS: list search recent posts

could not output timecode from video out F350

COW Forums : Sony XDCAM - EX & Related

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
mark pigott
could not output timecode from video out F350
on Apr 29, 2010 at 5:11:07 pm


We shot a piece in SD DVCam, and I read that by changing the Operations Menu/Video/To Output
TC, that this will show up in the Video Out from the BNC.

I enabled TC on the ViewFinder Menu, and the one for TC OUT to Video Out,

but yet, all I got was the regular video less TC overlay.

I'd had to use the XDCAM software now, ingest the clip and add timecode with a generator.

Which is way slower.

Did I miss anything, I spend about 2 hours reading the F350 manual and gave up.

This is a waste for a client review with TC overlay...


Return to posts index

mark pigott
Re: could not output timecode from video out F350
on Apr 30, 2010 at 3:08:09 pm


Maybe my first post wasn't clear but I am looking for some help

We have the cinelata F350 Sony XDCAM, and I wanted to do a client
review DVD directly from the SD output on the F350 WITH timecode overlay.

It was shot a 35MB DV, so it is SD already.

Even though I went through the Operations Menu and enabled
TC overlay on Video Out, when I hit play I still got only the
SD video less the TC overlay.

Did I miss something?

Thanks

Mark Pigott






Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2017 CreativeCOW.net All Rights Reserved
[TOP]