FORUMS: list search recent posts

EX1, 24P, and NTSC 29.97

COW Forums : Sony EX, FS5/FS7 & Related

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
John Vogel
EX1, 24P, and NTSC 29.97
on Apr 19, 2010 at 10:46:56 pm

I've been combing the forums and can't seem to get a direct answer.

Can the EX1 film 24P, like the HVX or HPX that adds a 2-3 or 2-3 pulldown?

From what I gathered from the Sony site, yes, but the frame is 1440x1080.

Return to posts index

Don Greening
Re: EX1, 24P, and NTSC 29.97
on Apr 20, 2010 at 12:24:04 am

The EX1 only shoots square pixel 1920x1080 in 24p. The EX1R has a 1440x1080 anamorphic mode but not the EX1. Both cameras record true progressive 23.98fps (24p) to the cards but output 24psf from the SDI port for a smoother picture on a 29.97fps (30p) display.

psf = progressive segmented frame - essentially an interlaced stream but a complete picture for every frame.

Did I get it right, folks? I've never shot or edited 24p.

- Don

Return to posts index

Jorge Pinto
Re: EX-3 1080 24P is recording with 3:2 pulldown?
on May 4, 2010 at 4:29:05 pm

Si fueran tan amables de ayudarme, tengo toda una secuencia grabada por error en 1920x1080 a un Vid rate de 29.97 fpr(XDCAM EX 1080p30 35 Mb/s VBR) y quisiera pasarla a 23.98 fps (XDCAM EX 1080p24-35 Mb/s VBR)
Que debo Hacer. Agradezco de antemano su colaboracion.

If they were so kind to help me, I have a whole sequence 1920x1080 mistakenly recorded a rate of 29.97 fpr Vid (XDCAM EX 1080p30 35 Mb / s VBR) and would like to pass it to 23.98 fps (XDCAM EX 1080p24-35 Mb / s VBR)
What to do. I appreciate your help in advance

Return to posts index

<< PREVIOUS   •   VIEW ALL   •   PRINT   •   NEXT >>
© 2018 All Rights Reserved