Kona 3 output defaults to bars


	Cow Forums : AJA Kona << PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>

Kona 3 output defaults to bars
by John Christie on Jul 25, 2009 at 11:04:44 pm

Hey Folks

Even though I change the default output of the Kona card to be black in the Aja control panel, it always changes back to color bars. It's a pain as I'm starting to get some burn in on my plasma monitor.

I'm running the latest Kona drivers 6.0.3 and FCP 6.0.5

Cheers

John Christie

Respond to this post • Return to posts index

Re: Kona 3 output defaults to bars
by Aaron Neitz on Jul 26, 2009 at 1:15:03 am

when does it change back?

when control panel is open?

or when you close it?

re-install drivers....

Respond to this post • Return to posts index

Re: Kona 3 output defaults to bars
by Bob Zelin on Jul 26, 2009 at 3:26:18 pm

this is a guess. I had something like this happen with the AJA Control Panel, where you change something, and it doesn't "stick", and you reboot, and it reverts to the previous settings.

If you are in a company, where you have a network, an IT admin, and you are not the administrator, but just a user on your MAC, you probably don't have "permissions" to change the settings and have them stay. Tell your IT admin that you need full administrative privdgliges, or log in as the root user, and the settings in AJA Control Panel will "stick".

Bob Zelin

Respond to this post • Return to posts index

Re: Kona 3 output defaults to bars
by John Christie on Jul 27, 2009 at 5:05:45 pm

Hi Bob

That was it, logged on as admin and it "stuck"

Thanks guys

John Christie

Respond to this post • Return to posts index


	<< PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>