Kona Drivers 6.0 and Varicam VFR Bug!?!


	Cow Forums : AJA Kona << PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>

Kona Drivers 6.0 and Varicam VFR Bug!?!
by Marco Giovannini on Aug 23, 2008 at 1:09:22 pm

Hi, all I have one Kona3 and one Kona2, I have tried to install new 6.0 drivers, but with my surprise there is a bug during the capturing with the AJ-HD1400E Varicam Tape. Usualy if I use the setting for the Varicam (1280x720p Varicam) The kona automaticaly eliminates the duplicating frame during the capturing. Now It's not function, if I try to capture for example 25Fps. shooting material with final-Cut 6.0.4 The clip is acquired in 60Fps. with all the frame. I have downgraded the firmaware and the drivers to 5.11 to eliminate this problem.
Any suggestions?

Respond to this post • Return to posts index

Re: Kona Drivers 6.0 and Varicam VFR Bug!?!
by Jeremy Garchow on Aug 23, 2008 at 3:13:30 pm

Try putting your clip in the timeline at the frame rate you intended to capture (such as 25fps). You might find that the proper frames are removed.

After that call and write AJA support immediately.

Jeremy

Respond to this post • Return to posts index


	<< PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>