Composite & S-video in and out


	Cow Forums : AJA Kona << PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>

Composite & S-video in and out
by Joe Murray on Jan 30, 2008 at 1:24:40 pm

What is the best converter to get Composite & S-video in and out of the Kona LH? Thanks

Respond to this post • Return to posts index

Re: Composite & S-video in and out
by Jerry Alto on Jan 30, 2008 at 5:28:08 pm

Joe- You don't need a converter. The LH has composite/YC in and out. Consult the manual on which BNC's to use.
Jerry

G5 Dual 3GB Ram
FCP5 Studio
External 1 TB SATA Raid 0
Kona LH, Second system w AJA ioLA
Sony Z-1

Respond to this post • Return to posts index

Re: Composite & S-video in and out
by Joe Murray on Jan 30, 2008 at 10:53:42 pm

Hi, my break out box only has component, SDI and Ref in and out but I will R.T.F.M.

Dual 1.25 MD, FCP 4.02, CW4, 1.25GB RAM, DUAL ATTO, Medea RT480 QT6.3

Respond to this post • Return to posts index

Re: Composite & S-video in and out
by Bob Zelin on Jan 31, 2008 at 2:15:21 am

Joe writes -
Hi, my break out box only has component, SDI and Ref in and out but I will R.T.F.M

Joe -
if you don't play with the AJA Kona Control Panel input tab for at least 30 minutes (I don't care if your mother is in the hospital - someone has to pay those bills !), I will come over there and give you a good beating. When you do this, you will discover how to convert those component input jacks into composite and S-Video. If this makes no sense after 30 minutes of staring, write back, and I will be more specific.

Remember this Joe, you will be reading manuals like these on your death bed .

bob zelin

Respond to this post • Return to posts index


	<< PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>