have an 844/xi Blur on an HP xw8000/Dual 2.8 Ghz/1 Gb ram/40 Gb ATA/
with an 840 Gb SCSI to SATA Raid Subsystem. My probelm is that I have moved to a new place, setup the equipment, and now can not find my video hard drive folder. I have my c: drive, my i: drive for audio, but no video drive. I have a k: drive but get the error that it is not accessible. The disk structure is corrupted and unreadable. Did I fry something? are my previous projects lost for good? can I get back the hard drive with them? or without them? Any help would be greatly appreciated. Also, can anyone help walk me through the "slushing" process?? Thanks in advance.
Re: Need some Help!! by Floh Peters on Aug 23, 2008 at 4:14:25 pm
[Joe Valdez]" I have a k: drive but get the error that it is not accessible. The disk structure is corrupted and unreadable. Did I fry something? are my previous projects lost for good?"
Have you checked all your cables, and that the drives are seated correctly in the chassis? I think you should look into the device manager to get more info about the state of your drives.
Re: Need some Help!! by Joe Valdez on Aug 23, 2008 at 5:48:33 pm
I have checked all the cables.. they seem ok. as for the drives.. not sure if I wanna open up the chassis to check them, but if I have to will give it a go. checked my device manager but not quite sure what I'm looking for. When I right click on properties for each drive, the device status says working properly, yet I still have no access to the K: drive. Anything else you need to know to help, let me know. Thanks again for the reply.
Re: Need some Help!! by Joe Valdez on Aug 23, 2008 at 6:22:21 pm
Hey Floh, disregard that last post. I have found my video drive and it is up and running now. I did have another question for you though. I am currently having to capture my video via firewire than convert to quicktime to import into the 844 program. For some reason, I can not capture the video directly into the 844 through my aja converter. When I try to acquire the video, I get an out of sync video error. Any thoughts are greatly appreciated. Thanks for the help.
