FORUMS:

Igniter X Component capture red tint


	Cow Forums : Aurora Video Systems << PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>

Igniter X Component capture red tint
by John on Nov 28, 2007 at 4:14:52 pm

I am trying capture beta SP footage using the component
setting on the Igniter X. The screen on the capture window and NTSC monitor has a red tint. It will capture correctly using S-video and I am able to play older projects using the component output. My current setting are:
OSX 10.4.9
Quicktime 7.1.5
Igniter Driver 6.4.4
FCP 5.14

I have checked my wiring and seems to be in order. I have also tried all component capture settings. DV, DVCPRO, DVCPRO50 etc... Any thoughts?

Thank you

John

Respond to this post • Return to posts index

Re: Igniter X Component capture red tint
by David Battistella on Nov 28, 2007 at 4:42:22 pm

I'd say double check all of your cables and connections.

David

Respond to this post • Return to posts index

Re: Igniter X Component capture red tint
by David Battistella on Nov 28, 2007 at 4:42:30 pm

I'd say double check all of your cables and connections.

David

Respond to this post • Return to posts index

Re: Igniter X Component capture red tint
by John on Nov 30, 2007 at 4:32:16 am

switched out cables and double checked connections. still not working. One thing I did try was Restore Factory Defaults in Ignition (sys pref). The picture turned to B/W on the capture window and NTSC monitor. When I exited out of log/capture and relaunched log/capture the picture went back to the red tint. Is there a setting I should have on or off in Ignition? Also, reseeded the Igniter board. Could be another tragic story to a really nice product.

Respond to this post • Return to posts index


	<< PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>