APPLE FINAL CUT PRO:

Problem outputting from FCP Studio to Sony HDV Deck


	Cow Forums : Apple Final Cut Pro << PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>

Problem outputting from FCP Studio to Sony HDV Deck
by Vicky Kuperman on Jul 15, 2008 at 4:11:46 pm

Hello,
I am having an issue controlling my device through Final Cut Studio (6.0.2).
The computer registers the deck for Log and Capture mode and I have been capturing DV footage with no problem.
It is a Sony HDV Deck, Model GV HD-700. It is set for DV for my DV footage.

When it is time to playback my timeline or output back onto tape through the deck, however, I can't get my footage to show up on the deck and I cannot control my deck through the computer.

I tried almost every setting within Audio Video Settings, Device Control.
I set my Video Playback to All Frames as I usually do, refreshed AV/Devices.

I trashed my Final Cut Pro Preferences.
I tried to see if it was a problem within the deck.
The deck is set to:
DV (the options are HDV, DV, Auto)
1080i/480i (the options are 1080i/480i OR 480i)
iLink converter: OFF

If anyone has ever had this issue or has any ideas of what could be wrong, please let me know!
Thanks so much,
Vicky

Respond to this post • Return to posts index

Re: Problem outputting from FCP Studio to Sony HDV Deck
by walter biscardi on Jul 15, 2008 at 5:29:18 pm

iLink should be On, shouldn't it?

Walter Biscardi, Jr.
Biscardi Creative Media
HD and SD Production for Broadcast and Independent Productions.

STOP STARING AND START GRADING WITH APPLE COLOR Apple Color Training DVD available now!
Read my Blog!

Respond to this post • Return to posts index

Re: Problem outputting from FCP Studio to Sony HDV Deck
by Vicky Kuperman on Jul 15, 2008 at 7:37:19 pm

Thank you for your response.
Yes, I did try setting iLink to ON but no luck!
The people at SONY said to leave it off, however they were not trained in controlling the device through Final Cut so they did not end up helping me in the end.

Respond to this post • Return to posts index

Re: Problem outputting from FCP Studio to Sony HDV Deck
by Mike herbach on Jul 18, 2008 at 8:39:54 pm

any luck
the mainla sony guys are telling me that the sony Dc9 wont allow incoming HDV from print to video from FCP6
that sounds kinds whacked?

there has to be a way or it would not allow FCP to control the camera firewire?
I am just not seeing an image or sound ?
anyadvice?

Respond to this post • Return to posts index

Re: Problem outputting from FCP Studio to Sony HDV Deck
by Mike herbach on Jul 18, 2008 at 8:36:41 pm

I am having the same issue
need to get HDv dubs made on mini camera fast forwrds palys rewinds etc./... when I print to vdeio firewire starts the rec but no picture or sound .. has anyone figured this out?
I called sony and spoke with 2 different guys and got 2 different answers...
did sony makeinternal recording via fire wire in HD not available?

Respond to this post • Return to posts index


	<< PREVIOUS THREAD • VIEW ALL THREADS • PRINT • NEXT THREAD >>