Rendering green line at bottom of frame
by Jimmy Spangler
on
May 26, 2008 at 7:02:52 am
Hello,
I am Onlining a spot that is 4x3 Anamorphic 10 Bit Uncompressed and when I render there is a green bar being put at the bottom of the frame. It seems to happen on some of the transitions and only lasts a frame.
I have messed with some render control settings but those have not had any effect. Also one of my white color solids was rendering as bright blue for no apparent reason. I was able to fix it by making a new color solid.
Anyone else had problem with render artifacts/glitches such as these?
Re: Rendering green line at bottom of frame by Sean ONeil on May 26, 2008 at 8:54:38 am
I've had problems with mysterious green lines, as well as problems with a full green screen. There's a lot of scattered topics on this. I think the first thing to do is trash your FCP preferences. As well as your QT preferences and AJA preferences. And reinstall all the AJA software.
Re: Rendering green line at bottom of frame by Rafael Amador on May 26, 2008 at 9:01:34 am
Hi Jimmy,
The transitions are you using, are the FC standard transitions?
I had this green line when using a Freeware filter some time ago.
I think that that filter couldn't support 10b.
Mac OX 10.5.2-FC 6.02-QT 7.4.1
G5 2x2Gh 4GbRAM-BlackMagic Extreme
PMBP 17"Core2Duo 4GbRAM-AJA ioHD
JVC DTV-17"
SONY EX-1 . SONY PD170
..and always a big mess on top of the table.
Re: Rendering green line at bottom of frame by Jimmy Spangler on May 30, 2008 at 7:28:51 am
Yes, all of the effects were standard FCP dissolves and transitions. It seems to be just this particular project that is causing it. As an FCP user I have become used to strange things happening for no apparent reason.
