Final Cut Studio 2 (FCP 6.0.1) crashes while opening

	Final Cut Studio 2 (FCP 6.0.1) crashes while opening by Benno Klandt on Aug 8, 2007 at 11:54:13 pm Hi, I tryed everything... After installing and updating programs FCP Studio crashes while opening. Reinstalled FCP nothing still the same pluged of all hardware,trashed preferences, repaired permission and erased p ram. Nothing, the programm does not open, it crashes right bevore it should open up. I need help, we are in the middle of some timeframed work, cheers Benno Klandt Mac Pro MacPro2,1 Quad-Core Intel Xeon 3 GHz L2-Cache : 8 MB 16 GB RAM Respond to this post   •   Return to posts index

	Re: Final Cut Studio 2 (FCP 6.0.1) crashes while opening by JeremyG on Aug 9, 2007 at 1:49:00 am Repair your permissions on the boot drive (again). If that doesn't work, unhook any scratch drives and try to open it then. Jeremy Respond to this post   •   Return to posts index

	Re: Final Cut Studio 2 (FCP 6.0.1) crashes while opening by Benno Klandt on Aug 9, 2007 at 2:13:46 am Hi jeremy, thanks for the quick reply. I will do as you said, repair Permission did not help. I will copy scratch disk data then erase (unhook) 3x 750 sata HD striped to Raid 0 n Respond to this post   •   Return to posts index

	Re: Final Cut Studio 2 (FCP 6.0.1) crashes while opening by JeremyG on Aug 9, 2007 at 2:17:01 am You don't have to erase it, I just want you to eject it so it's not mounted to the desktop. then open FCP. Respond to this post   •   Return to posts index

	Re: Final Cut Studio 2 (FCP 6.0.1) crashes while opening by Benno Klandt on Aug 9, 2007 at 2:37:00 am Hi Jeremy, still no luck, ejected striped HD s, trashed the fcp plist and repaired permissions again. I reinstalled fcp just an hour ago, helpful idea to see the crash log files? thx Benno Respond to this post   •   Return to posts index

	Re: Final Cut Studio 2 (FCP 6.0.1) crashes while opening by JeremyG on Aug 9, 2007 at 2:46:09 am Sure. Respond to this post   •   Return to posts index

	Re: Final Cut Studio 2 (FCP 6.0.1) crashes while opening by JeremyG on Aug 9, 2007 at 2:53:32 am Hmm, can't see anything that I understand. I see you have a Kona card. Try uninstalling the drivers. Then try opening FCP. Jeremy Respond to this post   •   Return to posts index

	Re: Final Cut Studio 2 (FCP 6.0.1) crashes while opening by JeremyG on Aug 9, 2007 at 3:01:46 am It only takes a second, just run the Kona uninstaller. Jeremy Respond to this post   •   Return to posts index

	Re: Final Cut Studio 2 (FCP 6.0.1) crashes while opening by JeremyG on Aug 9, 2007 at 3:09:06 am Okay, now go to www.aja.com and install the very latest drivers for FCP6. http://www.aja.com/ajashare/Kona3_Software_4.0.tar Then install those and it should work. AJA makes very reliable drivers, they aren't broken, I think you might have the wrong version installed. Jeremy Respond to this post   •   Return to posts index

	Re: aja Kona 3 driver software 4.0 issue by JeremyG on Aug 9, 2007 at 12:30:31 pm AJA support is great and I am sure they will get back to you soon. Let me know how it goes when they respond. There's also an AJA kona forum here on creative cow. http://forums.creativecow.net/cgi-bin/new_view_posts.cgi?=98 Come to think of it, did you run the PCIe Expansion Slot Utility and assign the proper lanes to the Kona card? Jeremy Respond to this post   •   Return to posts index

	Re: aja Kona 3 driver software 4.0 issue by JeremyG on Aug 9, 2007 at 12:40:05 pm By the way, the Expansion Slot Utility is located here: /System/Library/Core Services/Expansion Slot Utility then you want to choose option 2 (x16 graphics + Two x4 Lane and One x1 Lane Slots). Make sure your Kona card is in slot 3 or 4 when you do this. Jeremy Respond to this post   •   Return to posts index

	Re: aja Kona 3 driver software 4.0 issue by JeremyG on Aug 10, 2007 at 4:43:36 am Sorry to hear about all the problems. Perhaps a fresh install will do you well. I think starting with FCP, and then AJA is a good way to go. Then build up everything else from there. Let us know if you need more help. Jeremy Respond to this post   •   Return to posts index

	Re: aja Kona 3 driver software 4.0 issue by JeremyG on Aug 10, 2007 at 5:55:50 pm Awesome! I'm glad you are now up and running. The thing to do now is install one thing at a time and make sure that FCP/Kona works at the end of that install. A pain in the butt, but at least you will know what's working and what's not working. Good luck and feel free to write back at any time. Jeremy Respond to this post   •   Return to posts index